标题: 请教dCS Puccini CD/SACD几个问题! [打印本页] 作者: ZYZS 时间: 2008-9-19 20:36 标题: 请教dCS Puccini CD/SACD几个问题! 这个机子是否有数字输入?
比如bnc同轴aes平衡等接口?
是否可以另外接转盘,数字声卡输出到该机(这个时候puccini可否做升频+解码)作者: ZYZS 时间: 2008-9-20 02:40
不知他的数字升频解码部分是否有dCS Elgar Plus+Purcell强?
顺便pm下价钱作者: weihong 时间: 2008-9-20 13:47
一般来说,DCS还是一套来用的,转盘和解码以及数字修正各负其责,配合使用。作者: ZYZS 时间: 2008-9-21 14:55
我还有一个问题,就是当他接受外部输入(44.1 48 96)做解码的时候,他是否会先升频在解码?
我看到原厂说明书写着
Data on the digital inputs is NOT upsampled to DSD before being oversampled to Ring ! DAC format.
外国介绍网的资料
PCM Digital Inputs: 2x SPDIF on RCA, will accept data at 32, 44.1, 48, 88.2 or
96kS/s and process up to 24 bits, not upsampled.作者: weihong 时间: 2008-9-21 15:30
应该先升频再解码。作者: ZYZS 时间: 2008-9-21 18:40
原帖由 weihong 于 2008-9-21 15:30 发表
应该先升频再解码。
I was however incensed with the cheap plastic remote and the absence of this players ability to DSD upsample from external sources.
There are no optional filters available when playing a CD with Upsampling turned Off or
when using the Digital Inputs, so the Filter icon is greyed out.
It is quicker to change filters using the Filter and Filter- buttons on the remote control.
Set the Source menu page to Disc to play CDs or SACDs.
Set the Source menu page to RCA1 or RCA2 to select data from an external digital
source (such as a DVD player or a DAB radio) connected to one of the Digital Inputs.
Note that the CD mechanism is turned off while a Digital Input is selected.
It is quicker to change source using the Input and Input- buttons on the remote control.作者: ZYZS 时间: 2008-9-22 14:35
顶顶,等待回答作者: weihong 时间: 2008-9-22 15:55
dCS就解码而言,当然不同的输入方式会有不同的表现,舍去前二件只用它的解码实际上意义已经不大了。它的很多功能是需要配合起来使用的。作者: ZYZS 时间: 2008-9-22 17:08